What To Do When You Can’t Uninstall a Program

The Add or Remove Programs utility that comes with the Windows operating system often fails to ensure complete removal of programs. Therefore, quite often, loads of orphan files, folders and registry entries are left behind. Over time, your system gets clogged with this unwanted data that eventually causes it to slow down and even generate many different types of errors.

This is the reason why to prevent all these problems, it is essential that we take measures to ensure complete removal of programs from the system. There are many different tools available today that can help you achieve this goal. Some of the commonly used tools and methods are discussed in this article.

(more…)

How To Stream Music To Your Xbox 360 on a Wireless Network

The way we listen to music has changed over the past few years. Many people have gone from CDs to digital tracks that are stored on our computers. One of the biggest challenges has been having music on your computer that you want to listen to in your living room. Thanks to the Microsoft Xbox 360, if you have a wireless network and a Windows-based PC, you can now listen to the music on your computer through your Xbox 360.

To get started, you have to first have a wireless network set up and the Xbox 360 able to receive that signal.

1. Purchase a wireless high speed internet router. I recommend visiting www.xbox.com and looking at the list of approved routers, as some will conflict with the Xbox. The installation of a router will be well outlined in the instructions that you receive with the router.

(more…)

How To Transfer DVR Recordings to DVD

With all the advancements in technology today you’d think it would be simple to create a DVD of a show or program that you recorded on your DVR. Although it can be done, it’s not necessarily as straightforward as you might think. It takes a little extra time setting up your home video system and, usually, an additional investment in some extra hardware as well.

(more…)

How to Initiate a First Kiss

A first kiss is like a first impression, except it is much more important. This kiss will be your first intimate experience together. Follow these steps to make sure your first kiss is not your last kiss! Here are some steps on how to initiate a first kiss.

Things You’ll Need:

• Breath mints

Step1
Find somewhere to be alone. Crowded parties, dance floors and greasy restaurants are all terrible places for a romantic first kiss. Think up an excuse to be alone. Go for a walk, take a drive, get some fresh air.
 
Step2
Pay attention to body language. Is there contact? Is your heart pounding?
 
Step3
Wait for a good moment. Wait for a lull in the conversation, when your eyes meet and you both can’t seem to look away. The moment will feel right.
 
Step4
Build up your contact and culminate it with a kiss. Let him or her anticipate it eagerly.
 
Step5
Lean in slowly. Give a kiss on the cheek gently and move toward the lips.
 
Step6
Take it easy. You got your kiss, don’t push it. A kiss should not be rushed.
 
Step7
Smile and pull back. Keep eye contact and say good night, or rejoin the party.

How to Create Your First Web Site

These simple guidelines are for entry-level Web programmers. Better options are available for more sophisticated users.

Getting Started

Step1
Choose an ISP to host your Web site.
 
Step2
Investigate several hosting services, considering factors such as maximum space, accessibility, reputation and terms of service.
 
Step3
Select and download a Web-page editor. Several simple editors are available for free; Netscape Composer is one. These editors let you see what your site will look like as you build it, so you won’t have to learn HTML or other programming languages.
 
(more…)

How to Get and Survive a First Date

There are those who throw endless hints to that special somebody hoping they will eventually take the bait and there are those who feel if they cast enough lines in the water, they’re sure to get a bite. Is there a happy medium?

Step1
So you’d really like to go out with that sales rep with the incredible smile. Forget the hints. Hopefully you already have an unlisted number or a cell phone (can’t be too careful) and a handful of business cards. What? No business cards? Go get some and duhhh, don’t include your work number on these cards. These are meant to introduce you to possible dates-not business partners. Oh, and please no fictitious lofty titles such as "Pat-world class ski champion" unless of course you are a world class ski champion in which case it would be fine.

(more…)

How To Convert Access to MySQL

Both Microsoft Access and MySQL have found wide use in many companies though for different reasons. The main advantage of Access is its relative ease of use while MySQL’s strength comes from its versatility. MySQL’s versatility allows it to work in conjunction with programs written in various languages as well as even Access. It allows multiple-user access, makes management of large databases easier, provides increased security, and simplifies backup management. In addition MySQL is provided free of charge. To migrate from an Access to MySQL we will be using a free program called DBTools. DBTools has a feature that allows us to directly import data from Access files.
 
(more…)

How To Make Your Computer Start-Up Faster

OK, so this is supposed to help those who are having a bad time starting up their computers.  You know the feeling–you turn it on and it takes a lifetime for you to actually do something on it.  Argh!  These steps are easy to follow, and there is no software required. 

1. Click on the green button on the left bottom of your desktop called "Start."
2. Now click where it says, "Run," and a box will pop up.
3. Now on this box, type "msconfig," and hit the enter key.
4. Now when the "System configuration utility" window shows up, you will see tabs on the upper part of the window.
5. Click on the tab that reads "Startup."  You will see numerous names with check boxes all checked.

Now you will notice that most of those names with the check boxes checked are things you don’t really use when you start up your computer–things like Messenger and LimeWire and those kinds of software.  Why have them start and show up when you don’t need them?  Well, let’s take them out then…just follow the steps below to do so.

1. Uncheck the boxes for the stuff that you know you won’t be using as often.  Be sure not to uncheck the system boxes.
2. After unchecking, hit the "apply" key followed by the "Close" key and you will see a box that says, "You must restart your computer."  If you want to restart your computer now, hit the "restart" key.  But if you are still doing something or need to finish up what you are doing, then just click on the "Exit without restart" key and restart manually after you’re done.  Changes will be made after the system is restarted.

And now you are done. Restart your computer and you’ll see for yourself–no more multiple screens popping up when you turn on your PC!

How To Assess the Legitimacy of an Online Money-Making Opportunity

Many people have a lot of difficulty in assessing a legitimate online money-making opportunity and often fall victim to the carefully planned scams whose sole purpose is to make money from their victims. These online scams are often organized by criminals who extort money from innocent victims. Anyone can fall victim to these scams. Below are several simple yet powerful guidelines that can be used to assess the legitimacy of an online money-making opportunity.

(more…)

How To Clean an LCD Monitor

To clean your LCD, you can use a soft cloth, water and isopropyl alcohol.

1. Turn off your LCD monitor. Turn off your screen and unplug any power sources connected to it (if possible). This will also make it easier to see dirt, dust, and streaks.
2. Grab a soft, clean cloth. Look around you house for the softest, smoothest, and cleanest cloth you can find. Look in eyeglass cases, linen closets and/or laundry rooms.
3. Grab water and/or isopropyl alcohol. If your monitor isn’t very dirty, water will do just fine but if it has been a while since you last cleaned it, you can use a mixture of isopropyl alcohol and water (about half and half) and put it in an empty spray bottle.
4. Spray the mixture onto cloth. Make sure you spray the mixture onto your cloth and not directly onto the screen.
5. Wipe screen gently. Make your first pass over the screen lightly so you can just get the big stuff. Then refold the cloth, spray it, and wipe gently but with enough pressure to get rid of finger prints and other dirt. Make sure you also wipe your screen from left to right, up to down or vice versa.
6. Turn on screen. Now turn on your screen and you should have a clear, beautiful screen with no marks!

How To Solve a Rubik’s Cube

This article will present a beginner’s guide to learning the Rubik’s cube. Follow the steps in this guide, and you should be able to solve the cube reliably. It will take time and practice to become fast, but you will be in a position to solve those cubes at your friends’ houses that have been sitting on the bookshelf unsolved for the last 6 years.

Before you read the article, make sure you start with a completely solved Rubik’s cube. Read the whole article, and learn the basic concepts, and make sure you learn the move sequences that are at the end of the article ("Basic Move Sequences") before you mix up the cube. It’s much easier to see what each move sequence does when you start with a solved cube. You can do a move sequence, and then see what it does by looking at what happened to the cube.

(more…)

How to Build A HUGE List For Email Marketing

Need to increase your list of email addresses for opt-in email marketing and newsletters? Learn how to build your list with just a few easy steps.

Things You’ll Need:

• 1 hour or less/day
• Please feel free to rate this article!

Step1
If you are trying to build a list for your email marketing campaign or newsletters, an easy way to accomplish this is through free traffic exchanges. However, there is a strategy that must be followed to make this successful. With this technique, you will be offering a free report of high value. Create these free reports using free private label rights (plr) content/articles, which can be found using the link provided for you in the Resources Box below article, titled "FREE PLR CONTENT/Articles".
(more…)

How to : make HOMEMADE LOTSA MEAT PIZZA

This is an example on what you can conjure up on days you just don’t want to cook/you really don’t know what to make, that happened to me on this day i made this, no recipe, just thoughts racing through my mind.imagination is there try it out, let us know what you come up with.

Things You’ll Need:

• 2-1LB grnd sirlion/chuck,1-lb mild sausage,26oz.chunky Ragu[green pepper mushroom] 16oz jar medium salsa, green-yellow bell pepper, 1- LG onion, 1-bag each: shredded cheddar, fiesta blend colbymontere

(more…)

How to Add AdSense Ads to a WordPress Blog

AdSense is an advertising program run by Google that enables you to place content-relevant advertisements on your blog. These ads generate revenue on a pay-per-click basis.

Step1

Use your favorite seach engine such as Google, Yahoo! or Dogpile.

Step2

Type in: Adsense-Deluxe Wordpress Plugin.

Step3

Once the search engine has finished populating its results, click on the first link provided.

Step4

Follow the instructions.

How to import an export Firefox passwords

Its definitely hard to remember the usernames and passwords for all the websites that we visit daily. The benefit of using a smart browser like Firefox is that it saves the login credentials within the Firefox password manager and retrieves them automatically when you visit a particular website thus allowing you to access it.

But what if you want to print out that login credentials list for future reference or want to save it as a document list somewhere within your operating system. Password Export, a Firefox addon, is there to help you in this regard.

(more…)

How To Make a Basic Cheese Strata

The basic cheese strata recipe has been around longer than most of us have been alive because of its ingredient-stretching and low-cost qualities. Plus, with having to assemble the strata the night before, breakfast or brunch becomes a no-fuss experience. This recipe will be a special hit, particularly when you have guests in the house.

 
(more…)

How To Brew Beer

Beer is composed of malt, hops, water and yeast. It can be brewed at home using one of two methods: 1) all-grain brewing, or 2) a malt extract brewing kit.

To produce beer, yeast ferments the sugars in malted barley. All grain-brewing involves converting malted barley starch into fermentable sugar, and then extracting those sugars. With a malt extract brewing kit, the sugars have already been converted and extracted for you. As a result, when you make beer with this method the process isn’t much more complicated than making a box of macaroni and cheese. In this article, we’ll be discussing the simpler process of using a malt extract brewing kit.

(more…)

How to Convert MP4 to MP3

If you’re looking to convert MP4s to MP3s, chances are you want to convert an MP4 audio file to play on your MP3 player. But before we move on to cover how to convert the files, let’s go over the main differences between Mp3s and Mp4s.

• MP3 (MPEG-1, Layer 3): MP3s are small, high quality audio files that can be played on MP3 players or software. MP3s can be easily created using a home computer, a ripper program that copies a song from a CD to your computer, and an encoder that converts your music to MP3 format.
• MP4 (MPEG-4 Part 14): Mp4 is used for audio and video. This file type enables for high quality streaming over the internet and next generation cell phones. There are 2 main types of MP4 files. The first type is called Simple Profile, which is used for low resolution digital video content, popularly used for online distribution. The second version is called Advanced Video Coding , which is a higher quality format used for HDTV content.

(more…)

How To Make Barking a Thing of the Past

Dogs love to bark, and do so for a variety of reasons. It is their form of communication. Sometimes, a barking dog can be a nuisance to both the owner and the neighborhood. In order to modify your pooch’s barking behavior, you must first understand what is causing it. Once the culprit is identified, then a non-barking training program can be started immediately.

Puppies learn very quickly that barking gets them the attention they want. He barks, you check to see what is going on. In this case, the barking is caused by a need for attention. It’s a good idea to not give into his pup-like attention-seeking habits. As the pup grows up, he may still resort to barking, because he knows it will produce results. Make sure you are giving your dog an adequate amount of attention. Spend time playing with him and taking him for walks. He will soon learn that he does not have to bark to get you to play.

(more…)

How to Avoid Infection Following a Peel

Following a chemical peel, the skin is particularly vulnerable to infection, because it is in effect a large wound. The greater the depth of the peel, the more risk there is for infection. Infections can slow down the healing process and cause permanent scarring. In very rare cases, it can be fatal. Proper post-operative care and following the doctor’s instructions are the keys to preventing infection.

(more…)